Tükendi
Tükendi
Schneider ATV320U22M2B Hız Kontrol Cihazı ATV320 - 2.2kW - 200-240V - Monofaze - Kitap Tipi
Schneider ATV320U22M2B Hız Kontrol Cihazı ATV320 - 2.2kW - 200-240V - Monofaze - Kitap Tipi
2,753.64 TL
Satıcı: Pasif Mağaza
%100
Pasif Mağaza
Ücretsiz Kargo
Schneider ATV320U22M2B Hız Kontrol Cihazı ATV320 - 2.2kW - 200-240V - Monofaze - Kitap Tipi
Schneider ATV320U22M2B Hız Kontrol Cihazı ATV320 - 2.2kW - 200-240V - Monofaze - Kitap Tipi
2,753.64 TL
Satıcı: Pasif Mağaza
Ücretsiz Kargo
Listeme Ekle
%100
Pasif Mağaza | range of product |
Altivar Machine ATV320
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Complex machines
|
|
| device short name |
ATV320
|
|
| format of the control block |
Book
|
|
| product destination |
Synchronous motors
Asynchronous motors |
|
| EMC filter |
Class C2 EMC filter integrated
|
|
| IP degree of protection |
IP20 conforming to EN/IEC 61800-5-1
|
|
| type of cooling |
Fan
|
|
| network number of phases |
1 phase
|
|
| [Us] rated supply voltage |
200...240 V - 15...10 %
|
|
| supply frequency |
50...60 Hz - 5...5 %
|
|
| motor power kW |
2.2 kW for heavy duty
|
|
| motor power hp |
3.0 hp for heavy duty
|
|
| line current |
21.9 A at 200 V (heavy duty)
18.4 A at 240 V (heavy duty) |
|
| prospective line Isc |
1 kA
|
|
| apparent power |
4.4 kVA at 240 V (heavy duty)
|
|
| continuous output current |
11.0 A at 4 kHz for heavy duty
|
|
| maximum transient current |
16.5 A during 60 s (heavy duty)
|
|
| power range |
2.2...3 kW at 200…240 V, 1 phase (based on load duty)
|
|
| asynchronous motor control profile |
Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio, 2 points |
|
| synchronous motor control profile |
Vector control without sensor
|
|
| speed drive output frequency |
0.1…599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2...16 kHz adjustable
4...16 kHz with derating factor |
|
| safety function |
STO (safe torque off) SIL 3
SLS (safe limited speed) SS1 (safe stop 1) SMS (safe maximum speed) GDL (guard door locking) |
|
| communication port protocol |
Modbus serial
CANopen |
|
| optional communication modules |
Communication module, CANopen daisy chain RJ45
Communication module, CANopen SUB-D 9 Communication module, CANopen open style terminal block Communication module, EtherCAT RJ45 Communication module, DeviceNet Communication module, Ethernet/IP Communication module, Profibus DP V1 Communication module, Profinet Communication module, Ethernet Powerlink |
| variant |
Standard version
|
|
|---|---|---|
| output voltage |
<= power supply voltage
|
|
| permissible temporary current boost |
1.5 x In during 60 s (heavy duty)
|
|
| speed range |
1…100 for asynchronous motor in open-loop mode
|
|
| speed accuracy |
+/- 10 % of nominal slip 0.2 Tn to Tn
|
|
| torque accuracy |
+/- 15 %
|
|
| transient overtorque |
170…200 % of nominal motor torque
|
|
| braking torque |
<= 170 % during 60 s with braking resistor
|
|
| regulation loop |
Adjustable PID regulator
|
|
| motor slip compensation |
Automatic whatever the load
Adjustable 0...300 % Not available in voltage/frequency ratio (2 or 5 points) |
|
| acceleration and deceleration ramps |
Linear
U S CUS Ramp switching Acceleration/deceleration ramp adaptation Acceleration/deceleration automatic stop with DC injection |
|
| braking to standstill |
By DC injection
|
|
| protection type |
Input phase breaks: drive
Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive |
|
| frequency resolution |
Display unit: 0.1 Hz
Analog input: 0.012/50 Hz |
|
| electrical connection |
Screw terminal, clamping capacity: 0.5...1.5 mm², AWG 20...AWG 16 (control)
Screw terminal, clamping capacity: 4...6 mm², AWG 12...AWG 10 (motor/braking resistor) Screw terminal, clamping capacity: 4...6 mm², AWG 12...AWG 10 (power supply) |
|
| connector type |
1 RJ45 (on front face) for Modbus/CANopen
|
|
| physical interface |
2-wire RS 485 for Modbus serial/CANopen
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen |
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| number of addresses |
1…127 for CANopen
1…247 for Modbus serial |
|
| method of access |
Slave CANopen
|
|
| supply |
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
|
|
| local signalling |
1 LED (green)CANopen run:
1 LED (red)CANopen error: 1 LED (red)drive fault: 1 LED (red)drive voltage: |
|
| width |
60.0 mm
|
|
| height |
325.0 mm
|
|
| depth |
245.0 mm
|
|
| net weight |
2.9 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
|
| discrete input number |
7
|
|
| discrete input type |
Programmable (sink/source) (DI1...DI4)24...30 V DC, with level 1 PLC
Programmable as pulse input 20 kpps (DI5)24...30 V DC, with level 1 PLC Switch-configurable PTC probe (DI6)24...30 V DC Safe torque off (STO)24...30 V DC - 1500 Ohm |
|
| discrete input logic |
Negative logic (sink) (DI1...DI6), > 19 V (state 0), < 13 V (state 1)
Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) |
|
| analogue output number |
1
|
|
| analogue output type |
AQ1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 10 bits
AQ1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 10 bits |
|
| sampling duration |
2 ms (AI1, AI2, AI3) - analog input
2 ms (AQ1) - analog output |
|
| accuracy |
+/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60 °C analog input
+/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C analog input +/- 1 % AQ1 for a temperature of 25 °C analog output +/- 2 % AQ1 for a temperature of -10...60 °C analog output |
|
| linearity error |
AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog input
AQ1: +/- 0.3 % for analog output |
|
| discrete output number |
3
|
|
| discrete output type |
Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
Configurable relay logic: (R2A, R2B) NO - 100000 cycles Logic: (LO) |
|
| refresh time |
Logic input (DI1...DI6): 8 ms (+/- 0.7 ms)
Relay output (R1A, R1B, R1C): 2 ms Relay output (R2A, R2C): 2 ms |
|
| minimum switching current |
Relay output R1, R2: 5 mA at 24 V DC
|
|
| maximum switching current |
Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1 on resistive load, cos phi = 1: 4 A at 30 V DC Relay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 250 V AC Relay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 30 V DC Relay output R2 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2 on resistive load, cos phi = 1: 5 A at 30 V DC |
|
| specific application |
Machinery
|
|
| Variable speed drive application selection |
Hoisting Self erecting
Material handling Carousel Material handling Conveyor Material handling Lifting platfrom Material handling Palletizers - medium performance Material handling Transfer table Material handling Turn table Material working (wood, ceramic, stone, pvc, metal) Cutting - medium accuracy Material working (wood, ceramic, stone, pvc, metal) Drilling Material working (wood, ceramic, stone, pvc, metal) Saw Packaging Bagging Packaging Feed conveyor low performance Packaging Filling bottles - intermittent operation Packaging Linear labeling Packaging Other application Packaging Stretching wrapping Packaging Tray take Textile Knitting Textile Printing machines Textile Spinning Washing machines Car Washing machines Other application Hoisting Standard crane - travelling or trolley |
|
| Motor power range |
2.2…3 kW at 200…240 V 1 phase
|
|
| motor starter type |
Variable speed drive
|
| isolation |
Between power and control terminals
|
|
|---|---|---|
| insulation resistance |
> 1 MOhm 500 V DC for 1 minute to earth
|
|
| noise level |
43 dB conforming to 86/188/EEC
|
|
| power dissipation in W |
Fan: 102.0 W at 200 V, switching frequency 4 kHz
|
|
| operating position |
Vertical +/- 10 degree
|
|
| electromagnetic compatibility |
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
|
| pollution degree |
2 conforming to EN/IEC 61800-5-1
3 conforming to EN/IEC 61800-5-1 |
|
| vibration resistance |
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 |
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60068-2-27
|
|
| relative humidity |
5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3 |
|
| ambient air temperature for operation |
-10…50 °C without
50…60 °C with derating factor |
|
| ambient air temperature for storage |
-25…70 °C
|
|
| operating altitude |
<= 1000 m without
1000...2000 m with current derating 1 % per 100 m |
|
| environmental characteristic |
Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3 |
|
| standards |
EN/IEC 61800-3
Environment 1 category C2 EN/IEC 61800-3 Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
|
| product certifications |
CE
ATEX NOM EAC RCM KC |
|
| marking |
CE
ATEX UL CSA EAC RCM KC |
Tüm Yorumlar